Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ABS 20% | PETG / ABS 35% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla Model 3 sunglass tray in center console
Shared by
3DPrintedCarPartDescription
This is a sunglass tray that sits in the middle console area of the Tesla Model 3. I designed this to accommodate my sunglasses, keys and work ID, while allowing access to tissues in a box sitting underneath the tray. This has been printed with PETG. You can also print this in ABS. Do not use PLA as it will definitely warp even at 100 deg F. There are two versions available: tray_v2 has walls that are 1mm thick, and tray_2mm_thick has walls with 2mm thickness. The model with thicker walls is more tolerant to printing issues like layer shifts. If you want to customize the depth, etc., I have included an OpenSCAD file that you can play with and adjust the settings to your needs.
Compatible Cars
Originally published on thingiverse.com by Pavan Pamidimarri (pavankp) · License: CC BY-NC-ND
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
