Tesla Model 3 Wheel Center Aero Cap - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tesla Model 3 Wheel Center Aero Cap

0 downloads32 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Center cap for Tesla Model 3 Aero rims. MainBody_Var....stl can combine with any of the four CenterCap_Var....stl files. I have not tested all the combinations yet! History MainBody files: V1: initial release V2: optimized hooks V3: add ring in the middle V4: add small holes for future designs V5: optimized hooks History CenterCaps: V1: initial release V2: optimized hooks Because of thingiverse issues you must download the stl's files under "Thing Files" separately.