Files (12)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Battery_Base_Field_New_Front_v2.stl | Accessory piece | 16.7 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| Battery_Base_Field_New_Middle_v2.stl | Accessory piece | 16.7 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| Battery_Base_Field_New_Rear_v2.stl | Accessory piece | 19.4 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| Battery_Base_Left_New_Front_v2.stl | Choose left variant | 14.3 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| Battery_Base_Left_New_Middle_v2.stl | Choose left variant | 14.3 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| Battery_Base_Left_New_Rear_v2.stl | Choose left variant | 17.9 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| Battery_Base_Right_New_Front_v2.stl | Choose right variant | 14.3 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| Battery_Base_Right_New_Middle_v2.stl | Choose right variant | 14.3 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| Battery_Base_Right_New_Rear_v2.stl | Choose right variant | 17.5 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| Field_Front_v1.stl | Printable file | 59.8 KB STL | Slice file | Slice file | Slice file | Ensure a strong adhesion to the print bed to prevent warping |
| Field_Middle_v1.stl | Accessory piece | 18.4 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| Field_Rear_v1.stl | Printable file | 82.5 KB STL | Slice file | Slice file | Slice file | Ensure a strong adhesion to the print bed to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla Model S Battery side mount base and cap
Shared by
3DPrintedCarPartDescription
Mounting Tesla Model S batteries on their side ends up with them sitting on their flange. Rather than grind it off, I designed these to accept the flange so they can sit flat and these keep everything aligned.
Compatible Cars
Originally published on thingiverse.com by Timothy Putaansuu (timthefinn) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
