Files (2)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 15% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Iphone11PM_holder.stl | Mount / bracket | 308.3 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal printing |
| TeslaMobileVentHolder3.stl | Mount / bracket | 34.1 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation in the slicer for optimal printing |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla mX/S Air Vent clip with iphone 11 Pro Max Holder
Shared by
3DPrintedCarPartDescription
Homemade Tesla AirVent clip for mobile holders. Also added an iPhone 11 Pro Max holder that are designed for using Krussel ultrathin case on your phone. This case is 0.something mm thin, so I guess it woks good without the case as well. The airvent clip is skeewed a bit to the right (see the bottom picture) to be able to see the whole screen of your phone and not get it hidden by the steering wheel. I have printed this with 10% infill on an old Flashforge creator (not PRO) printer using ABS. Then I used superglue to mount these together. Created in Fusion360 and printed with astroprint.
Compatible Cars
Originally published on thingiverse.com by Geir Lysnes (Flacker) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
