Tesla US/CCS2 Adapter Lock - Brazilian Version - image

Files (1)

Trava_Tesla-CCS2_revC2-Trava.stl

STL

10.3 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Trava_Tesla-CCS2_revC2-Trava.stl	Primary model	10.3 MB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the build plate to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Tesla US/CCS2 Adapter Lock - Brazilian Version

0 downloads28 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I made a 3d-printed lock for an aftermarket Tesla US to CCS2 adapter (ATM.EVs design sold in Brazil). This adapter is sold in Brazil and is made by ATM.EVs. It already includes a latch to lock the CCS connector in place, which prevents accidental removal, but not intentional removal. This lock will make it impossible for anyone to remove the CCS connector from the car, unless the adapter is unlocked by the car owner. IMPORTANTE NOTE: It was tested only on a 2022 Model Y. In other models, the distance between the car and the adapter might be different. If it doesn't fit your car, leave me a message and I can publish an updated version.