Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla Wall connector Gen 3, Quick release wall bracket
Shared by
3DPrintedCarPartDescription
A quick release interface bracket for the Telsa wall connector Gen 3, 3 phase version. I'm not sure if it fits the single phase version, please let me know. If you add a Plug and Cord to your Wall connector, you can take it easily to use it as a 3 phase mobile charger. It was strong enough to hold the weight of the charge cable coiled up and hanging on it, plus me pulling on it. Screws required. 6G x 12mm Sheet metal tappers - For the Interface bracket. Flie the tip off the screw, about 1mm or less, to make it a little shorter https://www.bunnings.com.au/zenith-6g-x-12mm-zinc-plated-self-tapper-pan-head-sheet-metal-screws-40-pack_p2420136 8G x 38mm Sheet metal tappers - Wall bracket. https://www.bunnings.com.au/zenith-8g-x-38mm-zinc-plated-self-tapper-pan-head-screws-18-pack_p2420156 Interface bracket = 271g Wall bracket clip = 122g.
Compatible Cars
Originally published on thingiverse.com by Colin Wizzbang (Wizzbang) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
