Files (3)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| CE3_Tesla_Phase_Stop_Suspended.3mf | Printable file | 992.4 KB 3MF | Slice file | Slice file | Slice file | Ensure a brim or raft is used for stability if necessary |
| Tesla_Phase_stop.STL | Printable file | 1.8 MB STL | Slice file | Slice file | Slice file | Ensure a brim or raft is used for stability if necessary |
| Tesla_Phase_Stop_Suspended.STL | Printable file | 1.8 MB STL | Slice file | Slice file | Slice file | Ensure a brim or raft is used for stability if necessary |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Testla Model 3 Phone Stop
Shared by
3DPrintedCarPartDescription
Taller phone stop for the Tesla Model 3. My phone case is thick, and the stock stop is too short, so my phone, sunglasses, etc fly right over and into the console. This stop replaces the stock stop (simply slide off to the left to remove old one). The remaining gap between the top of the stop and the console lid is about 1/4".
Compatible Cars
Originally published on thingiverse.com by Mark Lowe (Lownbttr) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
