Thinkware Dashcam H50 Mount for 2007 Toyota FJ Cruiser - image

Files (2)

Model_Only_mount_17.STL

STL

687.2 KB

mount_17.STL

STL

239.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Model_Only_mount_17.STL	Mount / bracket	687.2 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping
mount_17.STL	Mount / bracket	239.8 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mirror Covers

Thinkware Dashcam H50 Mount for 2007 Toyota FJ Cruiser

0 downloads54 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

https://youtu.be/cAqHxgMsyG4 Direct mount for the Thinkware H50 camera in the FJ Cruiser. (attach directly to the rear view mirror mount) BOM: 1x 50mm M3 bolt 1x 30mm M3 bolt 2x M3 knurl nuts.