Files (3)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| TomTomHiluxBracket_A.STL | Mount / bracket | 387.4 KB STL | 19g $0.46 | 21g $0.50 | 46g $1.10 | Ensure proper orientation in slicer for optimal support generation |
| TomTomHiluxBracket_B.STL | Mount / bracket | 118.5 KB STL | 13g $0.31 | 14g $0.34 | 31g $0.74 | Ensure proper orientation in slicer for optimal support generation |
| TomTomHiluxBracket_C.STL | Mount / bracket | 548.3 KB STL | 22g $0.53 | 24g $0.57 | 52g $1.25 | Ensure proper orientation in slicer for optimal support generation |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
TomTom XL Cradle for Toyota Hilux Cup Holder
Shared by
3DPrintedCarPartDescription
After fixing a TomTom XL which had it's USB SMD socket ripped off, I needed a simple attachment device for my Toyota Hilux, Using a three (3) piece design, a ball/socket mechanism allows rotation of Tomtom and the cupholder clip allows cradle to slide along edge of cup holder. The Tomtom holding frame pins the GPS in eight (8) points, making it very secure... A jubilee (pipe clamp) has been added to add the required tightness to the ball/socket mechanism. This reduces stress forces on plastic and should stop the 3D plastic from failing prematurely.. Shall let you know how many km the cradle lasts for.
Compatible Cars
Originally published on thingiverse.com by William DEER (Donatello) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
