Toolbox Holding Strap for BMW vehicles - image

Files (2)

BMW_Toolbox_strap_-_bottom.stl

STL

48.2 KB

BMW_Toolbox_strap_-_top.stl

STL

42.0 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

11g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.26

Filament only at roughly $24/kg PETG / ASA

Print time

19m–31m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
BMW_Toolbox_strap_-_bottom.stl	Printable file	48.2 KB STL	10g $0.24	11g $0.26	24g $0.57	Ensure proper hinge alignment during printing
BMW_Toolbox_strap_-_top.stl	Printable file	42.0 KB STL	10g $0.23	11g $0.25	23g $0.56	Ensure proper hinge alignment during printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Toolbox Holding Strap for BMW vehicles

0 downloads44 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The toolbox holding strap on my car broke in the middle due to material stress over the years. Designed a new strap with with a hinge, to prevent this from happening in the future.

Compatible Cars

BMW E39

Published Jun 28, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Federico Esquivel (esquivel) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.