Tow Hook Badge Holder Bolt for Mini Cooper Clubman F54 - image

Files (1)

MiniCooperTowHookBadgeHolder.stl

STL

1.3 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

50g

Based on 15% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 15%	100% solid	Recommendation
MiniCooperTowHookBadgeHolder.stl	Mount / bracket	1.3 MB STL	55g $1.31	50g $1.20	130g $3.13	Print with a 0.6mm nozzle for optimal detail and strength

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Tow Hook Badge Holder Bolt for Mini Cooper Clubman F54

0 downloads167 views0 likes

Shared by

Michael Chen

Verified

Description

I can verify that this fits the rear tow hook insert for the F54. Bolt is set at a 10 Degree angle from the round base so that the base can sit parallel with the bumper when screwed in. Printed in PETG with 3 walls, 10% infill, 0.24 Layer height until the threads then reduced down to 0.12 mm for the threads on a .6 nozzle.