Files (2)

tweeter_mount_DS.stl

STL

37.4 KB

tweeter_mount_PS.stl

STL

37.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
tweeter_mount_DS.stl	Mount / bracket	37.4 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping
tweeter_mount_PS.stl	Mount / bracket	37.4 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Panels

Toyota 4 Runner Tweeter Mount

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a bracket to mount aftermarket 1 inch tweeters in the front doors of 4th Generation 4Runners. I used these on my 2003 4runner and are working well, I assume the mount should work with all 4th gen 4Runners.