Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Toyota Auris phone stand

0 downloads27 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

My new Toyota Auris MY17 comes without a phone holder suitable for the size of today's smartphones. The only place I can keep it, is in the cans holder or in the closed compartments. So I've replaced the central cans holder divider with a phone stand. I've designed three version, two for iPhone6/7, with and without original Apple protective cover, and one presumably universal. The iPhone stand can accommodate the phone only in a vertical position. The one intended for naked iPhone can safely hold the phone upside-down without damaging the camera lens. The universal one can hold any size up to 10 mm in thickness, in vertical or horizontal position. Disclaimer: This phone stand is not intended for a phone to be used with the screen running, such as for monitoring the vehicle parameters with an OBD link, because its location distracts the driver by putting him under risk for himself and for others. So, use this stand only for phones which should not be watched while driving.