Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Left.stl | Choose left variant | 584.8 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing. |
| Right.stl | Choose right variant | 256.7 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Toyota C-HR phone holder
Shared by
3DPrintedCarPartDescription
Cell phone holder for Toyota C-HR. The bracket is printed in two sections, to fit in the Ender 3 bed (23x23 cm). The left bracket is modeled to be printed upside down. The holder is a bit too high, use a negative offset (-1mm should be enough) when placing on print bed to make sure the full bracket length is touching the surface. To avoid scratches I lined the interior of the bracket with velvet self-adhesive paper (like this one). I uploaded the Fusion360 archive files. Feel free to improve my design. UPDATE 23/03/2019: New version, better connection shape, single piece bracket and phone holder, slight slope for better reach.
Compatible Cars
Originally published on thingiverse.com by Nicholas Nicholas (namadori) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
