Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| 6x9_Adapter_V3.stl | Primary model | 164.5 KB STL | 46g $1.10 | 50g $1.20 | 110g $2.63 | Use a brim to prevent corner lifting |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Toyota Corolla 6x9 Speaker Adapter
Shared by
Michael ChenDescription
This is an adapter I designed to mount a standard 6x9 speaker in the rear deck of an 08 corolla. It should work in 03-08 rollas (among other toyotas with similar mounting) and with most 6x9 speakers. Uses the original speaker mounting screws for the outer holes and 1/2 inch screws to mount the speaker to the adapter. My original prints, in PLA, warped and cracked in the summer. Have since reprinted in ABS. I had slight lifting of the corners but not enough to warrant a reprint, but a brim may be helpful.
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
