Toyota Tacoma/4Runner front speaker adapter - image

Files (2)

Tacoma_front_speaker_adapter_Left.STL

STL

744.3 KB

Tacoma_front_speaker_adapter_Right.STL

STL

808.4 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Tacoma_front_speaker_adapter_Left.STL	Choose left variant	744.3 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
Tacoma_front_speaker_adapter_Right.STL	Choose right variant	808.4 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Toyota Tacoma/4Runner front speaker adapter

1 downloads273 views0 likes

Shared by

Michael Chen

Verified

Description

I designed these for a 6.5" speaker (Infinity PR6500cs to be specific). The screw pattern should fit most 6.5" speakers. I also gave a place to mount the crossover on the back. I angled the plates to better aim the speakers.