Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 20%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Tacoma Gen 3 Gas Cap Holder

0 downloads40 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a gas cap holder I designed for the Gen 3 Tacomas. I have included a version with the TRD Off Road Mountains logo, and one without. I printed it logo side up with supports using PETG with 20% infill and it worked well. You do want a little flexibility in the material. The logo came out a bit messier with the PETG than my test print in PLA, but I'm still satisfied with it.