Custom Key Fob for 2020 Toyota Tacoma - image

Files (2)

KeyFob.stl

STL

83.3 KB

KeyFob-PrintReady.stl

STL

82.7 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
KeyFob.stl	Printable file	83.3 KB STL	23g $0.55	25g $0.60	55g $1.32	Ensure proper bed adhesion to prevent warping
KeyFob-PrintReady.stl	Printable file	82.7 KB STL	23g $0.55	25g $0.60	55g $1.31	Ensure proper bed adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Custom Key Fob for 2020 Toyota Tacoma

0 downloads191 views0 likes

Shared by

Michael Chen

Verified

Description

Tolerances for this build were defined by my printer, so tolerances may differ for your printer. Friction fit (I used a dab of super glue to ensure tight seal).