Files (1)

ToyotaCorollaCupholder2.stl

STL

41.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
ToyotaCorollaCupholder2.stl	Mount / bracket	41.3 KB STL	Slice file	Slice file	Slice file	Verify the final orientation and support decisions in your slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Toyota Corolla Cup Holder

0 downloads21 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

PETG or ASA for durability in a car environment

Print time

Slice to calculate

Filament

Slice to calculate

Supports

supports unlikely

Infill

20-30% infill for a balance between strength and weight

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

Safety/IP review

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Cup holder for mid 2000s Toyota Corolla (E120), My friends car didn't come with cup holders, so designed this to fit in the centre console, it has a weird cubby with lid next to the handbrake where you would think they would put cup holders, and I think in some American and other versions they do, but in this NZ version (Also seen in JDM ones) it doesn't have cup holders. Printed in PETG with 0.6 nozzle, no supports needed. extra slot on the left hand sided need to clear a lip on the lid of the cubby.

Compatible Cars

Toyota Corolla

Published Jul 26, 2026Updated Jul 27, 2026

Originally published on printables.com by ataylor · License: CC BY

Browse categories

Browse other part families

Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Hyundai

3.9K

View & download STL files