Toyota Land Cruiser Prado 150 GME MB206/MB207 Contoured Backing - image

Files (1)

Toyota_Prado_150_GME_MB206_MB207_Contoured_Backing.stl

STL

144.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Toyota_Prado_150_GME_MB206_MB207_Contoured_Backing.stl	Primary model	144.9 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trim Pieces

Toyota Land Cruiser Prado 150 GME MB206/MB207 Contoured Backing

0 downloads67 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

GME MB206/MB207 backing plate contoured to the dash trim in the Toyota Land Cruiser Prado 150 for easy mounting. It's designed for the left side trim, flip the print if you want it on the right side. Reuse the screw and nut that came with the original backing plate.