Toyota Tacoma 2007-2020 Track Assembly End Cap - image

Files (1)

Tacoma_Bed_Rail_end_Cap_v2.stl

STL

454.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Tacoma_Bed_Rail_end_Cap_v2.stl	Cover / cap	454.9 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trim Pieces

Toyota Tacoma 2007-2020 Track Assembly End Cap

0 downloads70 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

this part will replace stock bed rail end caps on the Toyota Tacoma. Catalog note: Toyota Tacoma 2007-2020 Track Assembly End Cap is a 3D-printable car-part listing indexed for classified fitment 2007-2020 Toyota Tacoma. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.