Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| DoubleDinTrim.stl | Primary model | 10.8 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Trim ring for Pioneer NEX in Scosche kit Toyota Tacoma
Shared by
3DPrintedCarPartDescription
This thing is a replacement trim ring for aftermarket double DIN head units in Toyota Tacomas that use the Scosche double DIN install kit. My Pioneer 7200-NEX mounted with the original metal brackets sits at a very slight angle that prevented the trim piece that Scosche provided from snapping in place, so I had it kluged in with some mounting tape. Not ideal and that tape interfered with the motorized faceplate. I basically duplicated the design adding a few mm standoff on the bottom to match the mounting angle and allow the tabs to reach the lower slots. Fits perfect.
Compatible Cars
Originally published on thingiverse.com by Raymond Lopiccolo (raylo32) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
