Toyota/Lexus 3 Button Remote Key Case/Shell - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Toyota/Lexus 3 Button Remote Key Case/Shell

0 downloads113 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Dad recently noticed that the plastic of both of the keys for his car had cracked, and asked if I could print a replacement. "Sure, people have already made these, I've seen it" Well, there were some great designs on here that almost did the trick, but I had to make a few adjustments to make it work with Dad's car. The Panic and unlock buttons are symmetrical, so adding that hole was easy. I had to shorten the case and let the metal key stick out a further 1.5mm. This almost certainly makes the case weaker, but otherwise the key could not push far enough into the ignition lock when turning the car off which made it very difficult to remove from the car.