Files (1)

roof_rack_key_rav4.STL

STL

1.3 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
roof_rack_key_rav4.STL	Primary model	1.3 MB STL	Slice file	Slice file	Slice file	Use a support enforcer on the face with the keyed profile for optimal results

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Toyota Rav4 roof rack key

0 downloads93 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Needed a key to unlock/lock the OEM roof racks to unmount/mount them on a 2014 Toyota Rav4 XLE. The only way to get a key was to order one from the manufacturer. Printing it was a lot cheaper. The key is just an embossed elliptical shape on a T-shaped tool. It can be printed with minimal supports, I used a support enforcer on just the face with the keyed profile on it. I used PETG but PLA would be fine, just don't leave it in a hot car or it'll deform.