Toyota 58325-42040 Fuel Pump Access Cover - image

Files (1)

Toyota_58325-42040_Fuel_Pump_Access_Cover.stl

STL

111.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Toyota_58325-42040_Fuel_Pump_Access_Cover.stl	Cover / cap	111.8 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Toyota 58325-42040 Fuel Pump Access Cover

0 downloads37 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The access cover for the fuel pump on the Toyota RAV-4 will often rust away, exposing your interior to the wind and rain of the outside world. This part replaces your old rusty cover and seals up your car. It works with the OEM rubber pass-thru seal for the electrical wiring. You will need to seal this part to the car. Toyota uses some kind of black tar. I used hot glue and it seems to work fine.