Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ABS
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ABS 20% | PETG / ABS 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| mr2-holder_fixed.stl | Mount / bracket | 117.2 KB STL | 13g $0.31 | 14g $0.34 | 31g $0.73 | Ensure the print is oriented to minimize supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Toyota MR2 AW11 phone holder for Pixel XL
Shared by
3DPrintedCarPartDescription
Do you have a first generation MR2 and a Pixel XL? If so...you can use this;) I needed a way to hold a phone in an MR2 so I whipped this up. I used the clip that bcruton designed and added a base to it that will friction fit into the small nook between the radio and shift console. It is a 'quick and dirty' design for sure but it does work as planned. You will want to print this in ABS or PETG if you intend to keep this in a car during hot times of the year.
Compatible Cars
Originally published on thingiverse.com by Dave Thomas (DaveTea) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
