Files (3)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Clips.stl | Clip | 635.8 KB STL | 13g $0.32 | 14g $0.34 | 31g $0.75 | Trim plastic braces around the speaker at the backside of your doorboards to fit this adapter |
| LS-Halter_L.stl | Printable file | 1.1 MB STL | 16g $0.39 | 18g $0.43 | 39g $0.94 | Trim plastic braces around the speaker at the backside of your doorboards to fit this adapter |
| LS-Halter_R.stl | Printable file | 1.1 MB STL | 16g $0.40 | 18g $0.43 | 39g $0.94 | Trim plastic braces around the speaker at the backside of your doorboards to fit this adapter |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Toyota MR2 MK2 SW20 165mm door speaker adapter
Shared by
Michael ChenDescription
This are adapters to fit 165mm speakers into the Toyota MR2 doors. They are designed as high as possible to fit relatively big speaker chassis behind the original doorboards without change the OEM look of the door. You will have to trimm the plastic braces around the speaker at the backside of your doorboards to fit this adapters. No metalwork needed! There is a left and a right version, marked with L and R at the backward mounting hole. The mounting clips are also included, in case your old ones are messed up. Since these things are used in a car, I recommand a heat-resistant material.
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
