toyota supra mk4 1993 1/10 body shell 3d printable - image

Files (12)

002.stl

STL

1.0 MB

Light_front_left.stl

STL

581.0 KB

003.stl

STL

970.6 KB

right_rear_view_mirror.stl

STL

136.5 KB

001.stl

STL

4.5 MB

Light_front_right.stl

STL

559.9 KB

005.stl

STL

804.4 KB

supra_right_tail_light.stl

STL

361.0 KB

left_rear_view_mirror.stl

STL

136.2 KB

006.stl

STL

1.9 MB

supra_left_tail_light.stl

STL

359.2 KB

004.stl

STL

1.2 MB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

12 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
002.stl	Printable file	1.0 MB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping
Light_front_left.stl	Choose left variant	581.0 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
003.stl	Printable file	970.6 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping
right_rear_view_mirror.stl	Choose right variant	136.5 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
001.stl	Printable file	4.5 MB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping
Light_front_right.stl	Choose right variant	559.9 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
005.stl	Printable file	804.4 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping
supra_right_tail_light.stl	Choose right variant	361.0 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
left_rear_view_mirror.stl	Choose left variant	136.2 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
006.stl	Printable file	1.9 MB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping
supra_left_tail_light.stl	Choose left variant	359.2 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
004.stl	Printable file	1.2 MB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping