Toyota Supra mk4 brakeline brackets - image

Files (6)

2x7mm_bracket_for_brakelines_and_cannister_line_Part_A.stl

STL

108.9 KB

2x7mm_bracket_for_brakelines_and_cannister_line_Part_B.stl

STL

95.8 KB

2x7mm_bracket_for_brakelines_Part_A.stl

STL

80.0 KB

2x7mm_bracket_for_brakelines_Part_B.stl

STL

106.9 KB

3x7mm_bracket_for_brakelines_Part_A.stl

STL

94.9 KB

3x7mm_bracket_for_brakelines_Part_B.stl

STL

113.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

6 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
2x7mm_bracket_for_brakelines_and_cannister_line_Part_A.stl	Mount / bracket	108.9 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports
2x7mm_bracket_for_brakelines_and_cannister_line_Part_B.stl	Mount / bracket	95.8 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports
2x7mm_bracket_for_brakelines_Part_A.stl	Mount / bracket	80.0 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports
2x7mm_bracket_for_brakelines_Part_B.stl	Mount / bracket	106.9 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports
3x7mm_bracket_for_brakelines_Part_A.stl	Mount / bracket	94.9 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports
3x7mm_bracket_for_brakelines_Part_B.stl	Mount / bracket	113.9 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Toyota Supra mk4 brakeline brackets

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Brackets to mount the brakelines when the old clips cant be used. These fits the factory 7mm brakelines. Mounting can be done with a 6mm bolt and nut on the backside. For now there is 2 designs for the brakeline brackets and 1 for the combination bracket.