Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Toyota Tacoma 1G transmission breather vent relocation
Shared by
3DPrintedCarPartDescription
This is an adapter to relocate the transmission breather vent on a manual transmission 1gen (ie. first generation) Toyota Tacoma. The purpose of relocating the vent is to prevent water ingress into the transmission. It definitely works on a 2001 SR5 MT, other years might have subtle variations so YMMV. Note that you need two such adapters as there are two vents on the transmission. The transfer case and the front diff are raised from the factory. The rear diff needs a different nipple adapter and a hose. Snaps unto the nipple and has room for a small clamp to tighten. The barbed end fits a 3/8" hose.
Compatible Cars
Originally published on thingiverse.com by K Owen (koenbro) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
