Toyota Tacoma Replacement steering emblem - Pro Grille - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ASA / ABS 20%	ASA / ABS 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Toyota Tacoma Replacement steering emblem - Pro Grille

0 downloads40 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Replacement steering wheel emblem designed to fit the 3rg gen (2016+) toyota tacoma steering wheel. Requires removal of oem chrome emblem. Holes in back are for 1.75 filament to be glued into so the emblem can be pegged on like the OEM. Built in supports structure "color change" stl has toyota raised in order to swap filaments and color the letters. Emblem in photo was printed in abs then acetone smoothed and flat cleat coated.