Files (1)

Truck_Seatbelt_Clip.stl

STL

543.7 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

24g

Based on 25% main infill across listed model files

Material cost

$0.57

Filament only at roughly $24/kg PETG / ASA

Print time

41m–1.1h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Truck_Seatbelt_Clip.stl	Clip	543.7 KB STL	22g $0.52	24g $0.57	52g $1.25	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Toyota Tacoma Seat Belt Clip

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

So, a kind of annoying thing about my 2016 Tacoma is when the windows are down, the front seat belt on the passenger side catches the air and smacks the seat and the side of the cab. Thankfully, on the back seats of these trucks, Toyota included an integrated seat belt clip to prevent them from getting tossed around. They just forgot to add that feature on the front seat belts. In reality, you don't ever need this for the drivers side, but I like symmetry, so I made both sides. This should fit any Tacoma, but I don't have a 1st or 2nd gen to test on.