Toyota Tacoma under hood fuse box clip - image

Files (1)

FuseBoxClip.stl

STL

12.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
FuseBoxClip.stl	Clip	12.8 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Toyota Tacoma under hood fuse box clip

0 downloads29 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This thing is a replacement for the broken clip that is supposed to latch your under the hood fuse and relay box cover. Print it on its side. You will have to Dremel off the remnants of the original one and some nubs on the inside to allow this replacement to slide on. It stays on pretty good with a press fit but a little glue is advisable. Print in PETG, ABS or nylon for toughness.