Files (1)

Twizy_plug_for_the_lower_part_dashboard.stl

STL

204.2 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

17g

Based on 25% main infill across listed model files

Material cost

$0.40

Filament only at roughly $24/kg PETG / ASA

Print time

28m–47m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Twizy_plug_for_the_lower_part_dashboard.stl	Primary model	204.2 KB STL	15g $0.37	17g $0.40	37g $0.88	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Twizy plug for lower dashboard

1 downloads122 views0 likes

Shared by

Alfred

Verified

Description

Summary I have one plug broken and a part od the lower dashboard is hanging now. I neded this plug, so I create it. Not printed yet, still waiting for my printer.