Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| USB_Car_Lighter_Socket_v1.stl | Primary model | 98.8 KB STL | 12g $0.29 | 13g $0.32 | 29g $0.70 | Ensure proper fit and orientation in the slicer before printing |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
USB Car Cigarette Lighter Socket
Shared by
3DPrintedCarPartDescription
Designed a USB extension holder to replace a 12v cigarette lighter in a car. Specifically, this replaces the entire socket/trim piece in a 2012 Suzuki Kizashi. This is designed to hold the USB extension from a Sony XAV-AX150 headunit (or any Sony XAV-AX model headunits that have USB out the back). Assembled with 2 M3-10mm (10mm length) screws. The M3 screws stick out a bit which may make it difficult to push in place in the hole in the car, but if you push hard enough/wiggle it will pop in!
Compatible Cars
Originally published on thingiverse.com by Grant Stankaitis (grantukas) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Suzuki Vitara 1999 switch blind (XVavron's model remix) - glue connection
Ring Eyelet Jimny (2018+ / commercial)
Suzuki Jimny Box for removed Back Seat Safety Belt, Hard Top or Cabrio
Cover fixing split for Suzuki Ignis 2 luggage space
Jimny radio panel clip
BMW X5 E70 Center Console Blind Plate
BMW
