Vent Cover - Phone Holder - Dacia Lodgy - image

Files (1)

Vent-V3.stl

STL

260.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
Vent-V3.stl	Primary model	260.2 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Vent Cover - Phone Holder - Dacia Lodgy

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I have a Pioneer clamp which needs are square vent fins, which are relatively thin. I made this adapter to be used on the existing point where the orignal vent-fins rotate on. They click exactly on the correct points. Of course the mid-section can be customized to whatever is required. Recomment PETG for the summer in-car heat + heater in the winter -resistance. Please let me know if there are any questions.