Volkswagen MK1 convertable warning light covers - image

Files (3)

vw_cover_blank.stl

STL

97.9 KB

vw_cover_brake.stl

STL

144.0 KB

vw_cover_seatbelt.stl

STL

154.2 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

3 model files

Typical selected file

15g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.37

Filament only at roughly $24/kg PETG / ASA

Print time

26m–43m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
vw_cover_blank.stl	Cover / cap	97.9 KB STL	12g $0.29	13g $0.32	29g $0.70	Use PETG / ASA; check sealing faces and verify in slicer.
vw_cover_brake.stl	Cover / cap	144.0 KB STL	14g $0.33	15g $0.36	33g $0.78	Use PETG / ASA; check sealing faces and verify in slicer.
vw_cover_seatbelt.stl	Cover / cap	154.2 KB STL	14g $0.34	15g $0.37	33g $0.80	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

Volkswagen MK1 convertable warning light covers

0 downloads51 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

These are covers for the seatbelt and parking brake light on my volkswagen cabriolet. These same covers may also be compatible with similar MK1 or possibly MK2 volkswagens. Included are both blank and labelled versions of the covers. I was missing one of my covers, and had a hard time finding a replacement. I used my last brake light cover as a template to design this one. It is nearly identical to the original, but is modified slightly to fit more snugly.