Volvo 1398845 Cooling Fan Relay Mount - image

Files (2)

Relay_Mount_v3.stl

STL

12.1 KB

tinker.obj

OBJ

6.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Relay_Mount_v3.stl	Mount / bracket	12.1 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
tinker.obj	Accessory piece	6.0 KB OBJ	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Volvo 1398845 Cooling Fan Relay Mount

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I wanted a new mounting bracket for the Volvo 1398845 Cooling Fan Relay for a project car. I couldn't find a bracket so I put this together. It uses the top slide mount on the relay instead of the rear mount. This is my first project that I have posted for consumption. This was created on TinkerCAD and printed on a Prusa Mini at 0.15mm resolution with PETG. Holes are 7mm.