Files (1)

Volvo_S60_gas_cap_tether_fix.stl

STL

20.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Volvo_S60_gas_cap_tether_fix.stl	Cover / cap	20.8 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Volvo S60 gas cap tether fix

0 downloads63 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Volvo S60 2012 gas cap tether snapped off the tab that connected it to the fuel door. Measured everything with my digital calipers. Designed in Tinkercad, did a few iterative test prints on my Prusa i3 MK3S. Worked like a charm!