Volvo S60 window motor Bracket repaired - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Volvo S60 window motor Bracket repaired

0 downloads41 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

After Printing the original Thing it kept breaking when I closed the window as the holding clip pressed against the bracket to hard. I had a look on the original replacement you can buy on ebay and noticed that the clip is not enclosed by the bracket completely, I designed it that way and it worked flawless with the clip now having the possibility to move in both sides slightly. The clip I bent from a 2mm iron wire cloth hanger.