Files (2)

Volvo_Bulb_Holder_18mm_tall.stl

STL

86.5 KB

Volvo_Bulb_Holder_22mm_tall.stl

STL

132.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 60%	100% solid	Recommendation
Volvo_Bulb_Holder_18mm_tall.stl	Mount / bracket	86.5 KB STL	Slice file	Slice file	Slice file	Print with the square base on the printer bed for stability
Volvo_Bulb_Holder_22mm_tall.stl	Mount / bracket	132.6 KB STL	Slice file	Slice file	Slice file	Print with the square base on the printer bed for stability

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

Volvo 240 bulb holder

0 downloads49 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Made a copy of joritestlab's VW bulb holder by importing into FreeCad and rebuilding from basic shapes. I am still trying to perfect the 3 keying tabs so they fit better in the Volvo housing and make them printable without supports, but the current model will work. This works with the same bulb socket the joritestlab recommends. https://www.ebay.com/itm/Universal-1157-BAY15D-LED-Light-Lamp-Bulb-Socket-Holder-With-Wire-Connector/153966734883?hash=item23d921ee23:g:rRYAAOSwRn5dEvdo Some light sanding may be required to fit your specific housing. Printing: All my test prints have been in PLA with 100% infill with Repetier. I have been printing with the square base on the printer bed and no supports. There is an indexing pin on the Volvo housing, if a gasket is added, I recommend breaking off the pin and using a 38mm x 26mm x 3mm gasket.

Compatible Cars

Volvo (all models)

Published Jun 28, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by paul f. (paulf77577) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.