Volvo V40 Replacement bracket for headlight - image

Files (1)

BeugelLampV40_v4.stl

STL

59.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 30%	100% solid	Recommendation
BeugelLampV40_v4.stl	Primary model	59.7 KB STL	Slice file	Slice file	Slice file	Verify orientation and supports in your slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

Volvo V40 Replacement bracket for headlight

0 downloads34 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Summary Replacement for the headlight back cover brackets. They where broken on mine. This can be screwed on instead with a self tapping screw. And the cover will click in place again. Picture when mounted will follow:-) Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Resolution: 0.16 Infill: 40% Filament: BASF PTEG Transparent.