Files (2)

cup_holder.STL

STL

641.6 KB

Cup_Holder_with_text.STL

STL

713.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
cup_holder.STL	Mount / bracket	641.6 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed to prevent warping
Cup_Holder_with_text.STL	Mount / bracket	713.9 KB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Volvo 940 740 Cup Holder

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Alternative Cup Holder design, uses significantly less material than centre-console solution. Usable on driver and passanger doors. Have not test-printed the part including the VOLVO text (may be difficult to print).