Files (8)

ecu_spacer_14mm_v1.stl

STL

379.6 KB

ecu_spacer_14mm_v2.stl

STL

257.8 KB

ecu_spacer_14mm_v3.stl

STL

243.8 KB

ecu_spacer_14mm_v5.stl

STL

244.0 KB

ecu_spacer_20mm_v1.stl

STL

386.8 KB

ecu_spacer_20mm_v2.stl

STL

262.7 KB

ecu_spacer_20mm_v3.stl

STL

248.5 KB

ecu_spacer_20mm_v5.stl

STL

248.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

8 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
ecu_spacer_14mm_v1.stl	Printable file	379.6 KB STL	Slice file	Slice file	Slice file	Scale the spacer thickness according to your needs, but be aware that thicknesses over 6.5mm may cause issues with the ECU cover.
ecu_spacer_14mm_v2.stl	Printable file	257.8 KB STL	Slice file	Slice file	Slice file	Scale the spacer thickness according to your needs, but be aware that thicknesses over 6.5mm may cause issues with the ECU cover.
ecu_spacer_14mm_v3.stl	Printable file	243.8 KB STL	Slice file	Slice file	Slice file	Scale the spacer thickness according to your needs, but be aware that thicknesses over 6.5mm may cause issues with the ECU cover.
ecu_spacer_14mm_v5.stl	Printable file	244.0 KB STL	Slice file	Slice file	Slice file	Scale the spacer thickness according to your needs, but be aware that thicknesses over 6.5mm may cause issues with the ECU cover.
ecu_spacer_20mm_v1.stl	Printable file	386.8 KB STL	Slice file	Slice file	Slice file	Scale the spacer thickness according to your needs, but be aware that thicknesses over 6.5mm may cause issues with the ECU cover.
ecu_spacer_20mm_v2.stl	Printable file	262.7 KB STL	Slice file	Slice file	Slice file	Scale the spacer thickness according to your needs, but be aware that thicknesses over 6.5mm may cause issues with the ECU cover.
ecu_spacer_20mm_v3.stl	Printable file	248.5 KB STL	Slice file	Slice file	Slice file	Scale the spacer thickness according to your needs, but be aware that thicknesses over 6.5mm may cause issues with the ECU cover.
ecu_spacer_20mm_v5.stl	Printable file	248.6 KB STL	Slice file	Slice file	Slice file	Scale the spacer thickness according to your needs, but be aware that thicknesses over 6.5mm may cause issues with the ECU cover.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Volvo / Ford T5 ECU Spacer

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

##### Volvo S40, V50, C30, C70 T5 and Ford Focus RS/ST MK2 ECU Spacer. Thanks to *mynameideasweretaken* for providing a prototype print from which measurements were taken for this model. v6 - Optimised the hole spacing Scale the spacer thickness depending on how aggressive you want to be. Bear in mind that anything more than 6.5mm and it may be impossible to fit the ECU cover. Common thicknesses are 6.5, 8, 14 or 20 mm.