Files (1)

Volvo_Pedal.stl

STL

1.2 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Volvo_Pedal.stl	Primary model	1.2 MB STL	Slice file	Slice file	Slice file	Ensure a secure mounting system to the gas pedal

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Volvo gas pedal extension

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This model was created for a person who had trouble with reaching the gas pedal, which is placed backward more than the other pedals. Sharing in case anyone else also has such a problem. The holes can be used in combination with a screw or a bolt and nut to mount the extension to the pedal.