Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG 20% | PETG 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| volvo_key_embedded_petg.stl | Primary model | 1.1 MB STL | 46g $1.10 | 50g $1.20 | 110g $2.63 | Pause print at specified layer to insert key and transponder |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Volvo Key (V70/S70) 90's
Shared by
Michael ChenDescription
YOU NEED TO SACRIFICE A WORKING VOLVO KEY TO FINISH THIS PROJECT The plastic heads on Volvo keys from the 1990's always get sticky and dirty. So I decided to print a new one aaaand it's better than original :) You have to cut open your old volvo key to extract the transponder for the immobilizer and the key itself. The transponder is very fragile - be careful when cutting into the plastic. You have to pause the print at the layer where the pocket for key is finished, then insert your key and the transponder and resume the print. Set a pause command at the correct layerhight in your slicer to insert the key and transponder.
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
