Files (1)

volvo_rim_cap_62.stl

STL

701.7 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 35% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ABS

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ABS 20%	PETG / ABS 35%	100% solid	Recommendation
volvo_rim_cap_62.stl	Cover / cap	701.7 KB STL	40g $0.95	50g $1.20	95g $2.27	Use PETG / ABS; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Volvo Rim Cap 62mm Diameter

1 downloads163 views0 likes

Shared by

Michael Chen

Verified

Description

Volvo 62mm diameter rim cap for S70, V70, 850, etc. I printed this with the "Volvo" side face down (of course with supports), so on glass bed the surfaces become shiny. I painted the rest black afterwards, so the finish is similar to the original one. You can also print this with the "Volvo" caption facing up, but then you would need more support material. If you want to be sure, print it from PETG or ABS. I printed it from PETG, it snaps in and out nicely. Didn't test with PLA, but maybe it could work.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

Volvo (all models)

Published Mar 6, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

BMW

3.1K

License: CC BY

View & download STL files