Files (1)

emblem_larger_rev_1.stl

STL

4.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
emblem_larger_rev_1.stl	Primary model	4.6 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Volvo Polestar Bracket

0 downloads53 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This bracket is designed to allow a user to affix a Polestar emblem to the front of the car. It uses the original holes for the R-Design bracket that comes on many Volvo's. This is for the larger emblem, part number 31408534. Also it is suggested that the user glue this bracket in but if you wish you could try to drill and tap the studs on the bracket. The bracket here was printed using a Fortus 250mc machine with support material. Previous rev's were printed using Ultimaker's and the quality should be the same. Original file was created in CREO and then saved as a STL.