Files (1)

volvoMiniCableClip.stl

STL

85.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
volvoMiniCableClip.stl	Clip	85.6 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used if necessary for adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Organizers

Volvo USB Mini Cable Clip

0 downloads46 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I needed to run some USB cables to charge our phones in the front. These clips were designed to keep cables relatively out of sight as well as remain removable. I have them on my P3 S60. I suspect they fit other Volvos and perhaps even some other cars.