Files (1)

xc60_volvo_sim_card_holder.stl

STL

49.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
xc60_volvo_sim_card_holder.stl	Mount / bracket	49.1 KB STL	Slice file	Slice file	Slice file	Add a metallic contact on the side for proper SIM card connection

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Organizers

XC60 Volvo SIM card holder

1 downloads66 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/a2PD436ZvLv if you had lost your Volvo SIM card holder you can replace it with this 3d printed support. NB you should have to add a metallic contact on the side (see in the original picture the metallic part on the bottom), it could be enough a piece of aluminum/copper foil attached with glue. ATTENTION... this project is shared without any guarantee or support;-).. and could require to smoodge some edges to facilitate the insertions.